TERA PUMP XL UNIVERSAL GAS CAN BATTERY POWERED FUEL TRANSFER PUMP - TP-TRFA03-XL

Specifications

• Power: 4x (AA) Batteries, Sold Separately
• Flow Rate: 2.3 Gallons per Minute
• Suction Tube: 23.4 inch
• Discharge Hose: 51.2 inch
• Compatible Liquids: Gasoline, E15, E85 (Remove pump after use, E85 may corrode seals), diesel, kerosene & non-potable water

Power Nozzle

• Based on our best selling TRFA01-XL, pump has been upgraded to have the power button right on the nozzle
• Redesigned auto stop nozzle for ergonomic feel

Emergency Power

• Recommended to use all 4x (AA)  batteries when you are able to, but it is possible to operate with 2x (AA) batteries during emergencies

Auto Stop Sensor

• Auto-Stop System to prevent fuel loss or accidental spills
• Our Built-In Sensor will automatically stop without the need to press the off button preventing any Overflow

Vinyl Hose

• Upgraded outtake hose to Vinyl to be resistant against minor nicks and cuts

Hands-Free Experience

• Built-in locking clip secures nozzle on receiving receptacles for a hands free experience

Universal Can Adapter

• Includes a Built-in Universal Gas Can Adapters
• Includes Utility Jug Adapter
• Compatible with Briggs & Stratton, No-Spill & Midwest Can
• **Gas Can NOT Included & Does Not fit FMD Gas Cans

Incompatible

• Drinking water, thinners, solvents, hot liquids, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid etc.

Disclaimer

• The TRFA03 and TRFA03-XL models can pump E-85, but it requires flushing the pump with water or gas afterward for optimal performance.

What's Included

• Transfer Pump & Manual

1. Insert intake hose into the supply tank and fasten the pump's universal thread adapter tightly.
2. Attach the auto=stop nozzle to your receiving tank using the clip, make sure toe the auto-stop nozzle is in a vertical position
3. Turn the switch on to start the flow.
4. After automatically stopping, bring the auto-stop nozzle up above the tank to drain the excess fuel or liquid back into the supply tank.
5. Insert the auto-stop nozzle in the nozzle holder for storage.

1. Do not run dry
2. Wear proper personal protective equipment
3. Never operate pump near fire or source of spark
4. Do not turn the pump upside down after use
5. Operate only in open, cool, and well-ventilated areas
6. Do not over tighten any part

Backed by a 1-Year Manufacturers Warranty